Panasonic HC-PV100, Operating Instructions Manual

Page: 53 / 160

- 53 -
Gain adjustment
≥
Use the jog dial to change the settings.
≥ Switch to Manual Mode. ( l 40 )
1
Press the GAIN button to switch to Manual Gain Mode.
≥
The gain value will be displayed in dB.
2
Adjust the gain by rotating the jog dial.
Gain value:
0dB to 30dB
≥
Value closer to 0dB darken the image.
≥ Value closer to 30dB brighten the image.
≥
To return to Auto Gain Mode, press the GAIN button or set this unit to Intelligent Auto Mode using
the iA/MANU switch.
≥
It is not possible to adjust the GAIN in the following situations:
j When a setting in [SCENE MODE] is enabled ( l 111 )
j
During Freeze Frame ( l 68 )
≥ If the gain value is increased, the noise on the screen increases.
≥
In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust the
gain. (
l 51 , 55 )
∫
Changing the maximum possible gain value for Auto Gain Mode
≥ Switch to Manual Mode. ( l 40 )
Select the menu.
≥
[AGC LIMIT] is not available when a setting in [SCENE MODE] is enabled. ( l 111 )
A
Gain value
≥
In Auto Gain Mode, “AGC” is displayed; in Manual Gain Mode, the gain value is displayed in dB.
B
[GAIN]
: [SW SETUP]
#
[AGC LIMIT]
#
desired setting
[3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB]/[27 dB]/[30 dB]


SEL/
PUSH
SET
GAIN

0dB

1
Jog dial
2
GAIN button
MENU
HC-PV100_GC_GW_SQW0750-1_mst.book 53 ページ ２０１８年１１月１６日 金曜日 午後５時１４分