Panasonic GX740Z Ehelp Download Page 320

Page: 320 / 323

LED does not turn to red in Standby mode

●

LED turns to orange in Standby mode in the following conditions:
– Recording is in progress.
–

Timer Programming

is set.

–

Home Network Server

is set to

–

Powered On by Apps

is set to

–

Home Streaming

is set to

Always

–

VOD Content Refresh

is set to

and VOD content is updated.

–

TV Anytime

is set to

–

Powered On by Easy Mirroring

is set to

●

LED turns to orange during adjustment of the panel (approx. 10 minutes to

maximum 80 minutes). LED turns to orange again in standby mode when

the TV is turned on / off before the panel adjustment is completed. (Be

sure to turn the TV off with the remote control to adjust the panel.)

The panel maintenance notification is displayed when turning the TV off with

Standby On / Off switch of the TV’s remote control.

●

Perform the panel maintenance. Select

Turn the TV off now

and press

to start the panel maintenance.
– The panel maintenance is interrupted when selecting

Don’t start panel

maintenance this time

or turning the TV off while the notification is

displayed.

When pushed with a finger, the display panel moves slightly and makes a

noise

●

There is a little gap around the panel to prevent damage to the panel. This

is not a malfunction.

- 320 -

Summary of Contents for GX740Z




































































































































































































































































































































Search results

Summary of Contents for GX740Z

Reviews:

Related manuals for GX740Z

Brands by name

Popular brands

Panasonic GX740Z, Ehelp

Search results

Summary of Contents for GX740Z

Reviews:

Related manuals for GX740Z

Brands by name

Popular brands