Panasonic GX740Z, Ehelp

Page: 102 / 323

■
Available mode indicator for each type of broadcast
●
NICAM - Used in New Zealand, Singapore, Hong Kong, etc.
– Regular broadcast (Standard Audio): No indicator /
– R NICAM MONO I (MAIN I): /
– NICAM STEREO: /
– NICAM DUAL MONO (MAIN I / SUB II): / /
●
A2 (German) - Used in Australia, Malaysia, etc.
– Regular broadcast (Standard Audio): No indicator /
– BILINGUAL or DUAL MONO (MAIN I / SUB II): /
– STEREO: /
= Note =
●
If the stereo signal is poor or the receiving conditions are not optimum or if
STEREO:MONO automatic switching occurs, it is recommended to switch
from STEREO to MONO.
●
Selected mode is not affected when the contents of the receiving signal
change.
●
When the receiving conditions deteriorate, listening will be easier if the
mode is set to the MONO position.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently
transmitted in some countries.
Digital Audio Preference
( DD / MPEG / HE-AAC )
Selects the initial setting for audio tracks.
DD :
The priority is given to Dolby Audio (Dolby Digital).
MPEG :
The priority is given to MPEG. (Australia only)
HE-AAC :
The priority is given to HE-AAC. (New Zealand only)
●
Dolby Audio (Dolby Digital) is the method of coding digital signals
developed by the Dolby Laboratories. Apart from stereo (2ch) audio, these
signals can also be multi-channel audio.
●
MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality. (Australia only)
- 102 -