ELC500 Control unit
160
Unit selection window is displayed.
Confirm Starting word address, Number of input words and Number of output words.
Click [OK]
Select and double-click slot No.1.
Unit selection window is displayed.
Select unit category and select unit type.
Number of input words and number of output words are input automatically.
Set starting word address, if you need, and click [OK].
After completing the setup, transmit setting by Online mode.
Point
- If there are some differences about connected units during power on or operating,
self-diagnosis error is occurred.
- When a starting word address is not input, system input it automatically.
- Based on the starting word address allocated to each unit, I/O numbers are allocated.
- Starting word address of I/O number allocated to the internal functions of ELC500 can be
changed to another number.
■
Input time constant
Input time constant for input unit or I/O unit can be changed if necessary.
Select from the followings and set to each unit.
0 / 0.1 / 0.5 / 1.0 / 5.0 / 10.0 / 20.0 / 70.0 [ms]
Setting time constant is added to the hardware response time of each unit.
■
Exclude this unit from I/O verification
In general, this check box should be unchecked.
If you want to exclude this unit from the scope of verification error temporarily for unit replacement or
adjustment, check this box.
