Panasonic ELC500 User Manual Download

Page: 126 / 208

ELC500 Control unit

118

5.6.6.4 Demand Monitor Device
Setup items related to demand monitor device.

Select [Demand monitor device] on navigator and it displays list for demand monitoring device setup
window. Double-click the line to setup.

Note

- Up to 50 devices are registered.

Up to 512 points total including logging device are registered.

- .Register logging devices without vacant line. If there is a vacant line, it counts as

registration point, e.g. when you register in No.10 next to No.1, it counts total 10-point
not 2-point.

- Max. value of demand value is 32-bit (unsigned). It stops the value of 32-bit (unsigned).

Summary of Contents for ELC500

















































































































































































































Search results

Summary of Contents for ELC500

Reviews:

Related manuals for ELC500

Brands by name

Popular brands

Panasonic ELC500, User Manual

Search results

Summary of Contents for ELC500

Reviews:

Related manuals for ELC500

Brands by name

Popular brands