ELC500 Control unit
75
Trigger Setup
5.6.3
In order to perform a data collection, logging file update, write data, send mail, special control, etc., it is
necessary to setup the timing to execute them in advance. The timing is called ‘Trigger’.
You can open the window by 2-way the below.
(1) Select [Setup] and click [Trigger].
(2) Click icon on tool bar
■
System trigger
There are ‘System trigger’ and ‘User trigger’.
7 types of trigger setting are set to system trigger.
System trigger is not possible to neither edit nor delete.
In order to change and add trigger, use ‘User trigger’.
<Setting system triggers>
Trigger name
Condition
Description
5 seconds interval
Fixed cycle
Trigger occurs at 5-sec interval.
1 minute interval
Fixed cycle
Trigger occurs at 1- min interval.
15 minutes interval
Fixed cycle
Trigger occurs at 15- min interval.
30 minutes interval
Fixed cycle
Trigger occurs at 30- min interval.
60 minutes interval
Fixed cycle
Trigger occurs at 60- min interval.
Every day 00:00:05
Appointed time
Trigger occurs at every day 00:00:05.
Every month _/01 00:00:05
Appointed time
Trigger occurs at 00:00:00 on the 1
st
of every
month.
A trigger occurs on the basis of the hour.
Ex.) In case of 5 seconds interval
Trigger occur time: 0-sec, 5-sec, 10-sec, ….. 50-sec, 55-sec.
