Panasonic DP-CL21 Series Maintenance And Specifications Download Page 61

Page: 61 / 103

Warning / Printer Error Messages

Settings and Printing

Network

Maintenance and Spec.

A5 in MPT
Transparency

A5 size transparency is requested
in the multi-purpose tray.

Load A5 sized transparency in the
multi-purpose tray.

A5 in MPT
Label

A5 size label is requested in the
multi-purpose tray.

Load A5 sized label in the multi-
purpose tray.

A5 in MPT
Coated Paper

A5 size coated paper is requested
in the multi-purpose tray.

Load coated, A5 sized paper in the
multi-purpose tray.

A5 in MPT
Envelope

A5 size envelope is requested in
the multi-purpose tray.

Load A5 sized envelope in the
multi-purpose tray.

A5 in MPT
Bond/Letterhead

A5 size bond/letterhead is
requested in the multi-purpose
tray.

Load bond/letterhead, A5 sized
paper in the multi-purpose tray.

A5 in MPT
Recycled Paper

A5 size recycled paper is
requested in the multi-purpose
tray.

Load recycled, A5 sized paper in
the multi-purpose tray.

Executive in MPT
Plain Paper

Executive size plain paper is
requested in the multi-purpose
tray.

Load plain, executive sized paper
in the multi-purpose tray.

Executive in MPT
Thin Paper

Executive size thin paper is
requested in the multi-purpose
tray.

Load thin, executive sized paper in
the multi-purpose tray.

Executive in MPT
Thick Paper/Card

Executive size thick paper/card is
requested in the multi-purpose
tray.

Load thick, executive sized paper/
card in the multi-purpose tray.

Executive in MPT
Transparency

Executive size transparency is
requested in the multi-purpose
tray.

Load executive sized transparency
in the multi-purpose tray.

Executive in MPT
Label

Executive size label is requested
in the multi-purpose tray.

Load executive sized label in the
multi-purpose tray.

Executive in MPT
Coated Paper

Executive size coated paper is
requested in the multi-purpose
tray.

Load coated, executive sized
paper in the multi-purpose tray.

Executive in MPT
Envelope

Executive size envelope is
requested in the multi-purpose
tray.

Load executive sized envelope in
the multi-purpose tray.

Error Message

Possible Cause

Corrective Action

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands