Panasonic DP-CL21 Series Maintenance And Specifications Download Page 53

Page: 53 / 103

Warning / Printer Error Messages

Settings and Printing

Network

Maintenance and Spec.

TR Replace

Transfer roller is worn out.

Replace the transfer roller.

FSR wearing out

Fuser unit is wearing out.

Have the fuser unit available.

FSR Replace

Fuser unit is worn out.

Replace the fuser unit.

Tray1 Empty

Tray 1 is empty.

Load media in the tray 1.

Tray1 not installed

Tray 1 is not installed.

Install tray 1.

Tray2 Empty

Tray 2 is empty.

Load media in tray 2.

Tray2 not installed

Tray 2 is not installed.

Install tray 2.

Tray3 Empty

Tray 3 is empty.

Load media in tray 3.

Tray3 not installed

Tray 3 is not installed.

Install tray 3.

HDD Full

Hard disk drive is full.

Remove unnecessary files from
the hard disk drive.

HDD I/O Error

HDD I/O error has occurred.

Perform Check Disk operation in
the HDD Maintenance mode.
If it still remains, perform Quick
Format or HDD Format operation
in the HDD Maintenance mode.
(

see “Using the HDD

Maintenance Mode” on page 76

in “Settings and Printing).

Adjusting for media

At continuous printing fuser
temperature is higher than
predetermined temperature.

The printing is stopped
automatically until the fuser
temperature is lower than the
predetermined temperature.

Warning Message

Possible Cause

Corrective Action

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands