Panasonic DP-CL21 Series Maintenance And Specifications Download Page 43

Page: 43 / 103

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

A media is not fed from
the multi-purpose tray
when the media is loaded
in the multi-purpose tray
only.

Multi-Purpose Tray is not
selected for Paper Source.

Select Multi-Purpose Tray for Paper
Source.

A different size's media is
fed even if automatic tray
selection is selected for
paper source.

(Windows NT 4.0 /
Windows 2000 /
Windows XP - PS)

The tray assignment of the
printer driver is not
matched the actual size of
the media in the tray.

Change the tray assignment as follow:

1. Display the Printers folder.

• Windows NT 4.0 / Windows 2000:

Click

[Start]

, select

Settings

and

click

Printers

• Windows XP Professional:

Click

[Start]

, then click

Printers

and Faxes

• Windows XP Home:

Click

[Start]

, click

Control Panel

click

Printers and Other

Hardware

icon, then click

Printers and Faxes

icon.

2. Click the PS printer icon.
3. Click

File

menu and click

Properties

4. Change the

Form To Tray

Assignment

setting in

Device

Settings

tab to the actual size of the

media in the tray.

5. Click

[OK]

Trouble

Possible Cause

Corrective Action

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands