Panasonic DP-CL21 Series Maintenance And Specifications Download Page 39

Page: 39 / 103

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

When connecting a printer
with USB interface and
installing the printer driver
with plug & play, the
printer is not added to the
Printers folder.

(Windows 98)

Specifying the driver folder
is incorrect during installing
the printer driver with plug
& play.

Perform the following instructions to
install the printer driver again.

1. Be sure to turn the printer on.
2. Connect the printer to the computer

with a USB cable.

3. Click

[Start]

, select

Settings

and

click

Control Panel

4. Double click the

System

icon.

5. Click the

[Device Manager]

tab.

6. Click

DP-CL21P

DP-CL21M

the

Other devices

7. Click

[Remove]

8. Click

[OK]

9. Click

[Close]

10. Restart Windows.
11. Install the printer driver following the

Wizard window.
For the detailed instructions, refer to
“Installing the DP-CL21P
/DP-CL21M Software (For
Windows)” in the Setup Guide.

Trouble

Possible Cause

Corrective Action

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands