Panasonic DP-CL21 Series Maintenance And Specifications Download Page 45

Page: 45 / 103

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

If the printer does not work properly

Trouble

Possible Cause

Corrective Action

The following menu is
grayed out or cannot be
used:

Pages per Sheet,
Booklet, Scale,
Fit to Output Paper Size,
Poster,
Watermark,
Overlay,
Reverse Page Order and
Collate (without hard disk
drive)

(Windows - PCL)

The installer was not used
to install the printer driver.

(Example)

The printer driver was
installed with Alternate
Driver (Windows NT 4.0) or
Additional Driver (Windows
2000 / Windows XP).

Reinstall the printer driver as follows:

1. Display the Printers folder.

• Windows 95 / Windows 98 /

Windows Me / Windows NT 4.0 /
Windows 2000:

Click

[Start]

, select

Settings

and

click

Printers

• Windows XP Professional:

Click

[Start]

, and then click

Printers and Faxes

• Windows XP Home:

Click

[Start]

, click

Control Panel

click

Printers and Other

Hardware

icon, then click

Printers and Faxes

icon.

2. Click the printer icon to delete it.
3. Click

File

menu and click

Delete

4. Insert the printer CD-ROM disk in

the computer.

5. Click

Custom Printer Setup

and

click

Install Printer Driver and

Utilities

6. If the

Purchase Information

window is displayed, select the shop
where you purchased the printer and
click

[Next >]

• If you cannot find the shop where

you purchased the printer, select

Other

and click

[Next >]

7. Click

[Yes]

8. Click the

Client PC

check button

and click

[Next >]

9. Click

[Browse...]

and select the

printer shared by the server
computer.

10. Follow the instructions on the

screen.

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands