Panasonic DP-CL21 Series Maintenance And Specifications Download Page 55

Page: 55 / 103

Warning / Printer Error Messages

Settings and Printing

Network

Maintenance and Spec.

WTC
Replace

Waste toner cartridge is full.

Replace the waste toner cartridge.

PC-Black
Not Installed

Black print cartridge is not
installed.

Install the black print cartridge.

PC-Color
Not Installed

Color print cartridge is not
installed.

Install the color print cartridge.

Reset Tray1
Remove MPT Paper

Multi-purpose tray is not in closed
position.

Remove media from the multi-
purpose tray.
Uninstall tray 1 and then install it.

Front or Right door
Open

Front or right side door is open.

Close the front or right side door.

Toner Door
Open

Toner door is open.

Close the toner door.

Reset Tray1

Multi-purpose tray motor error has
occurred.

Uninstall tray 1 and then install it.

Load Letter

Any tray does not contain letter
size media.

Load letter size media.

Load Legal

Any tray does not contain legal
size media.

Load legal size media.

Load A4

Any tray does not contain A4 size
media.

Load A4 size media.

Load B5 (JIS)

Any tray does not contain B5 (JIS)
size media.

Load B5 (JIS) size media.

All Media Tray
Empty

All trays that are possible to feed
media are empty.

If the upper tray is not installed
when Optional Paper Feeder(s) is
installed, it is impossible to feed
media from the lower tray.

Load media in a media tray (not to
be the multi-purpose tray).

Load Letter
in Tray1

Letter size media is not loaded in
tray 1.

Load letter size media in tray 1.

Error Message

Possible Cause

Corrective Action

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands