Panasonic DP-CL21 Series Maintenance And Specifications Download Page 60

Page: 60 / 103

Warning / Printer Error Messages

Settings and Printing

Network

Maintenance and Spec.

B5 (JIS) in MPT
Plain Paper

B5 (JIS) size plain paper is
requested in the multi-purpose
tray.

Load plain, B5 (JIS) sized paper in
the multi-purpose tray.

B5 (JIS) in MPT
Thin Paper

B5 (JIS) size thin paper is
requested in the multi-purpose
tray.

Load thin, B5 (JIS) sized paper in
the multi-purpose tray.

B5 (JIS) in MPT
Thick Paper/Card

B5 (JIS) size thick paper/card is
requested in the multi-purpose
tray.

Load thick, B5 (JIS) sized paper/
card in the multi-purpose tray.

B5 (JIS) in MPT
Transparency

B5 (JIS) size transparency is
requested in the multi-purpose
tray.

Load B5 (JIS) sized transparency
in the multi-purpose tray.

B5 (JIS) in MPT
Label

B5 (JIS) size label is requested in
the multi-purpose tray.

Load B5 (JIS) sized label in the
multi-purpose tray.

B5 (JIS) in MPT
Coated Paper

B5 (JIS) size coated paper is
requested in the multi-purpose
tray.

Load coated, B5 (JIS) sized paper
in the multi-purpose tray.

B5 (JIS) in MPT
Envelope

B5 (JIS) size envelope is
requested in the multi-purpose
tray.

Load B5 (JIS) sized envelope in
the multi-purpose tray.

B5 (JIS) in MPT
Bond/Letterhead

B5 (JIS) size bond/letterhead is
requested in the multi-purpose
tray.

Load bond/letterhead, B5 (JIS)
sized paper in the multi-purpose
tray.

B5 (JIS) in MPT
Recycled Paper

B5 (JIS) size recycled paper is
requested in the multi-purpose
tray.

Load recycled, B5 (JIS) sized
paper in the multi-purpose tray.

A5 in MPT
Plain Paper

A5 size plain paper is requested in
the multi-purpose tray.

Load plain, A5 sized paper in the
multi-purpose tray.

A5 in MPT
Thin Paper

A5 size thin paper is requested in
the multi-purpose tray.

Load thin, A5 sized paper in the
multi-purpose tray.

A5 in MPT
Thick Paper/Card

A5 size thick paper/card is
requested in the multi-purpose
tray.

Load thick, A5 sized paper /card in
the multi-purpose tray.

Error Message

Possible Cause

Corrective Action

Summary of Contents for DP-CL21 Series








































































































Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands

Panasonic DP-CL21 Series, Maintenance And Specifications

Search results

Summary of Contents for DP-CL21 Series

Reviews:

Related manuals for DP-CL21 Series

Brands by name

Popular brands