53
Multimedia Pocket
CAUTION
Handle the device as shown (holding both sides). Otherwise, the device may be
damaged. Also, do not apply excessive downward force on the device.
Inserting the Device
1
Gently insert the device with the plastic side (A) on top into the
multimedia pocket by pushing on both corners until it is firmly in
place.
2
Close the cover (B) until it clicks into place.
3
Close the cover (C) until the ridge (D) matches up with the mark (E).
NOTE
You can confirm whether the device is properly recognized or not by selecting the icon
on the taskbar or [Information] in the Setup Utility. If the device is not recognized
(or if a CD/DVD cannot be read or an FD/HDD/CD-R/CD-RW cannot be read or
written to), power off the computer and reinsert the device.
When the CD/DVD drive is installed:
If the vibration of the CD/DVD drive is excessive, check to see if the disc is inserted
correctly, and check that the disc is in good condition. If the disc is good and inserted
correctly, set the [CD/DVD Drive Speed] to [Low] in the Setup Utility.
