34
Security Measures
4
Only when the Supervisor Password has been set:
Enter your password at [Enter Current Password] and press
Enter
.
5
Enter your password at [Enter New Password] and press
Enter
.
To disable the Supervisor Password
Press only
Enter
.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the Supervisor Password
Press only
Enter
.
7
At [Setup Notice], press
Enter
.
8
Press
F10
and select [Yes], then press
Enter
.
CAUTION
Do not forget your password. If your Supervisor Password is forgotten, you will be
unable to use your computer. Contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
NOTE
Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on
Shift
or
Ctrl
.
Disabling the Supervisor Password also disables the User Password.