117
Dealing with Problems (Advanced)
Communications with access point are
cut off
Shorten the distance between the computer and the access point, and try the
detection again.
If there are multiple access points aside from the access point to which this
computer is connected, confirm that different channels have been set for each
access point.
Unable to connect to a network
Is the IP address of the access point wrong?
Following the operating instructions of the access point, set the IP address of
the access point again correctly.
Cannot communicate via an ADSL, or
cable modem..
Check to see whether IP address and DHCP server settings are set as
indicated by the ISP provider.
Cannot set wireless LAN to [Enable] or
[Disable]
It may become impossible to set the wireless LAN to [Enable] or [Disable] if
these settings are changed repeatedly on the [Network Connection] screen. In
this case, restart the computer.
Press the
F9
key in the Setup Utility. This will restore the Setup Utility's
settings to their default values (except the password settings).
Cannot communicate using
IEEE802.11a
Install the Wireless LAN Switch.
(
page 82
)
The Wireless LAN Switch icon (
or
) is not displayed.
Enable the wireless LAN using [Device Manager] or the Setup Utility.
Install the Wireless LAN Switch. (
page 82
)
Connecting Peripherals
An error occurs while installing the
driver
When you install the driver for a PC Card or peripheral device, be sure to use a
driver that is compatible with the operating system. If you use an incompatible
driver, malfunction may occur. For information on drivers, contact the
manufacturer of the peripheral device you purchased.
Networking: Wireless LAN (only for models with wireless LAN)
