Panasonic BT-LH910G Operating Instructions Manual Download

Page: 21 / 76

On-screen Display

(continued)

Closed caption (CC) display

Closed caption

display area

Closed caption

display area

(When the specified

window extends out of

the entire screen)

CLOSED CAPTION can be displayed when SDI

•

signals and VIDEO signals are input.

CLOSED CAPTION complies with the following

•

standards.

Composite Standard EIA/CEA-608 (VBI)

•

SD-SDI CC Standard EIA-608 (ANC)

•

HD-SDI CC Standard EIA-708

•

In the case of EIA-708, display is possible at a

•

position simultaneously specified for multiple

windows (up to 8).

The display position is within a display area that

•

is located inside the entire screen. (Refer to the

following notes.)

The display settings can be configured in the menus.

•

You can also select the type of CLOSED CAPTION,

display channel (EIA/CEA-608), and display service

(EIA/CEA-708) in the menus. (page 50)

Notes:

The specified window position is displayed as a

•

position within the display area depending on the

CLOSED CAPTION information.

The window may extend out of the display area

•

depending on the specified window position and

size. In such a case, the window will be displayed

but if the window also extends out of the entire

screen, the display position of the window will be

changed so that the window is displayed inside

the entire screen.

DC power supply voltage and battery level display

DC14.0V

50%

DC power supply voltage is displayed.

•

The battery level display is displayed when the

•

battery you are using is an Anton/Bauer battery

with a battery level display function.

Displayed when the operating status display is not

•

displayed.

The display can be set in the menus. (page 34)

•

Notes:

The DC power voltage and battery level serve

•

as a near end warning indication as they flash

when the level falls to the value set in the menu or

lower.

Furthermore, when the level drops to less than

approximately 10.0 V, the “END BATTERY”

battery level error is displayed in red, and

the unit performs the shutdown process after

approximately 3 seconds have elapsed.

With some batteries, operation may be stopped

•

by an over discharge function of the battery

itself before the battery level error of the unit is

displayed.

We recommend replacing the battery as soon as

possible.

Summary of Contents for BT-LH910G













































































Search results

Summary of Contents for BT-LH910G

Reviews:

Related manuals for BT-LH910G

Brands by name

Popular brands

Panasonic BT-LH910G, Operating Instructions Manual

Search results

Summary of Contents for BT-LH910G

Reviews:

Related manuals for BT-LH910G

Brands by name

Popular brands