15
Connect the external DC power supply to the
1.
DC IN socket on this unit.
Turn “ON” the external DC power supply switch.
2.
(Where the external DC power supply has a
power switch)
Turn “ON” the POWER switch on this unit.
3.
If an external DC power supply is used, then
check the ratings of the external DC power
supply so that they are compatible with those
of this unit.
Check the pin arrangements of the DC output
terminal of the external DC power supply and
those of the DC IN socket of this unit so that
their polarities are correctly arranged.
If +12 V are supplied to the unit’s GND
terminal by mistake, this may cause fire or
injury.
The external DC power supply cannot be
supplied from the DC output terminal of a
Panasonic camera-recorder because the unit
requires a current that exceeds the output
rating of a Panasonic camera-recorder.
DC IN socket
1: GND
4: +12 V
4
3
2
1
<Notes>
Use a shield cable with a length of 2 m (6.56 feet)
•
or less for the DC cord. Use of cords any longer
than 2 m (6.56 feet) may result in noise appearing
on the screen.
If the battery pack and an external DC power
•
supply are connected simultaneously, then the
external DC power supply will have priority.
If the external DC power supply is used, then the
battery pack may be fitted or removed.
If an external DC power supply is used, then make
•
sure that the external DC power supply is first
turned ON, then this unit is turned ON. If they are
turned ON in the reverse order, then this unit may
malfunction, because the output voltage of the
external DC power supply will gradually increase.
Input voltage that above the specification is not
•
displayed accurately.
DC IN socket
External DC
power supply
Using an external DC power supply
Supplying the power
(continued)
Summary of Contents for BT-LH910G
Page 75: ...75 Memo ...