Panasonic BT-LH910G, Operating Instructions Manual

Page: 6 / 76

6
Precautions for Use
The LCD screen is manufactured to precise
●
specifications. Although over 99.99 % of the
pixels function normally, 0.01 % of the pixels
are either missing or constantly lit (red, blue
or green). This is normal and not a cause for
concern.
The protection panel and liquid crystal panel is a
●
specially manufactured component. Wiping it with
a hard cloth, or rubbing it vigorously will scratch
the surface.
If a still image is displayed for an extended period
●
of time, it may generate a temporary afterimage
(phosphor burn-in). (However, such images can
be removed by displaying normal video for a
while.)
The response speed and brightness of liquid
●
crystal vary with ambient temperatures.
Do not install the unit in locations where enough
●
space cannot be provided around it as heat may
build up inside preventing normal operation. Be
sure to provide enough space around the unit.
Exposing the LCD screen to intense light sources
●
will impair its characteristics and lower image
quality.
In an environment exposed to drastic temperature
●
fluctuations, condensation may build up on
and inside the LCD screen. This may lower the
quality of the screen and may damage it. If there
are drops of water on the case, turn off the power
and wait until the condensation has evaporated.
Some video images may appear blurred on the
●
screen.
Leaving the unit in a location exposed to high
●
temperature and humidity for an extended period
of time may damage the LCD screen and cause
blurring.
Do not use the unit in excessively dusty
●
environments. Doing so may damage the LCD
screen.
Using the unit in cases such as the following may
●
result in image and audio distortion due to the
influence of electromagnetic waves.
When in the vicinity of a TV or computer •
When a mobile phone is on top of the unit •
When near equipment that generates a power •
magnetic field, such as a speaker or large
motor
If the unit becomes unable to operate properly
●
due the influence of equipment that generates
magnetism, turn off the unit (if using a battery,
remove it) and then wait a while and then turn it
back on.
Using the unit near radio broadcast equipment or
●
high-voltage equipment may result in image and
audio degradation.
This product has been specially designed for commercial use. As such, it should be used and operated
only by persons with related expertise.
Request
Please configure the following setting before using the unit for the first time.
The unit is shipped with the area of use set to the initial state. Before using the unit, set •
your area of use as described in “Selecting Area of Use” on page 8.