Panasonic BT-LH910G, Operating Instructions Manual

Page: 40 / 76

40
Main Menu
(continued)
FUNCTION setting restrictions
■
Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be configured.
Settings Inoperable Condition or Mode
HV DELAY SUB WINDOW •
WFM •
PIXEL TO PIXEL •
3D ASSIST •
When HDMI (640 x 480) input •
GAMMA SELECT When GPI is set •
When HDMI (640 x 480) input •
SD ASPECT When GPI is set •
SUB WINDOW (Still image) •
3D ASSIST •
When HDMI (640 x 480) input •
SCAN When GPI is set •
SUB WINDOW •
PIXEL TO PIXEL •
3D ASSIST •
When HDMI (640 x 480) input •
SUB WINDOW 3D ASSIST •
When HDMI (640 x 480) input •
WFM/VECTOR (VECTOR is not displayed when other than SDI1 or SDI2 input)
SUB WINDOW •
PIXEL TO PIXEL •
3D ASSIST •
When HDMI (640 x 480) input •
MARKER When GPI is set •
SUB WINDOW •
3D ASSIST •
When HDMI (640 x 480) input •
WHITE BALANCE When other than VAR1 to VAR3 selected in COLOR TEMP.
PIXEL TO PIXEL (Enabled when 1080i/p signal input)
When other than 1080i/p signal input •
SUB WINDOW •
3D ASSIST •
FOCUS-IN-RED When WFM is ON •
When GPI is set •
When INT-SG is selected •
LEVEL METER When other than SDI1, SDI2, or HDMI input
MONO When GPI is set •
When HDMI (640 x 480) input •
TIMECODE When other than HD-SDI input
CLOSED CAPTION When HDMI (640 x 480) input •
When VF signal input •
When YP •
B
P
R
signal input
3D ASSIST •
The function assigned to FUNCTION3 does not work when you operate the unit in 3D assist mode •
because the FUNCTION3 button becomes specifically for switching to 2D picture adjustment mode (2D
ADJUST).