Panasonic BT-LH910G, Operating Instructions Manual

Page: 63 / 76

63
REMOTE Specifications
(continued)
Assigned item Function Operating conditions
GAMMA SEL. STDIO/
PST
Switches the gamma curve to STDIO/PST
mode. Level operation (Short-circuited:
STDIO/ PST mode, Open:
STANDARD mode)
INPUT SEL. VIDEO Switches the input line to VIDEO. Edge operation
INPUT SEL. SDI1 Switches the input line to SDI1. Edge operation
INPUT SEL. SDI2 Switches the input line to SDI2. Edge operation
INPUT SEL. HDMI Switches the input line to HDMI. Edge operation
INPUT SEL. YP
B
P
R
Switches the input line to YP
B
P
R
. Edge operation
INPUT SEL. VF Switches the input line to VF. Edge operation
INPUT SEL. INT SG Switches the input line to INT SG. Edge operation
MONO Switches between color and monochrome
(MONO). Level operation (Short-circuited:
monochrome, Open: color)
R-TALLY
*
3 Lights the red tally. Level operation
(Short-circuited: ON, Open: OFF)
G-TALLY
*
3 Lights the green tally. Level operation
(Short-circuited: ON, Open: OFF)
PIXEL TO PIXEL Switches screen display between input
size and display size. Level operation
(Short-circuited: ON, Open: OFF)
FOCUS-IN-RED Displays the outlines of the subject that
are in focus in red Level operation
(Short-circuited: ON, Open: OFF)
REMOTE
STANDBY
*
4
*
5
Sets remote standby (turns off the
backlight, and turns off the power of
devices that are not required).
Level operation
(Short-circuited: ON, Open: OFF)
When “R-TALLY” and “G-TALLY” simultaneously go on, the tally color changes to orange.
* 3
When remote standby is set to ON, the CONT. and B.LIGHT LEDs on the front flash.
* 4
If the GPI terminal to be assigned is set to a short-circuited state first and then MENU is operated to set
* 5
this item, the backlight turns off and the screen display disappears, so MENU operation becomes unable
to be checked. To change the setting of this item, be sure to set it when the GPI terminal is in the open
state.
Restrictions
SD ASPECT does not operate when the input signal is HD. •
The MARKER items do not operate when the input line of the signal is VF. •
SD ASPECT, SCAN, WFM/VECTOR, MARKER, PIXEL TO PIXEL, and PIXEL POSITION do not operate •
in SUB WINDOW mode.
SCAN and MARKER do not operate in PIXEL TO PIXEL mode. •
GAMMA SELECT, SD ASPECT, SCAN, MARKER, and MONO do not operate when the input line of the •
signal is HDMI and the signal format is 640 x 480.
Priority of assigned functions
■
When both “MARKER1” and “MARKER2” are activated at the same time, “MARKER1” has priority. •
However, when the display aspect ratio is 4:3, the “MARKER1” aspect ratio is 16:9 and the “MARKER2”
aspect ratio is 4:3, “MARKER2” is displayed. In this case, the “MARKER2” background is controlled.
When “MARKER BACK HALF” and “MARKER BACK BLACK” are activated at the same time, “MARKER
•
BACK BLACK” has priority.
INPUT SEL. are prioritized in the order of “INPUT SEL. VIDEO,” “INPUT SEL. SDI1,” “INPUT SEL.
•
SDI2,” “INPUT SEL. HDMI,” “INPUT SEL. YP
B
P
R
,” “INPUT SEL. VF,” and “INT SG.”
When “GAMMA SEL. FILM” and “GAMMA SEL. STDIO/PST” are activated at the same time, “GAMMA •
SEL. FILM” has priority.