10
Controls and Their Functions
Front panel
2 3
1
F-IN-R
BT-LH910
CONT./
B.LIGHT
VOLUME/
BRIGHT
PEAK/
PHASE
CHROMA
1
HEADPHONES output jack (M3 stereo mini jack)
Allows you to connect headphones to check the audio when inputting an SDI signal or HDMI signal.
*
The volume and sound quality differ depending on the headphones.
In 3D assist mode, the audio of the SDI1 (L) side can be checked.
•
2
POWER switch/lamp
Switches the power supply ON/OFF. When the power is ON, the LED (green) lights up.
3
INPUT SELECT button
Selects the signal input line. Each time the button is pressed, the input changes in the following order:
VIDEO → SDI1 → SDI2 → HDMI → YP
B
P
R
→ VF → INT SG
VIDEO : Video input
SDI1 : Serial digital interface input (compatible with 3G/HD/SD)
SDI2 : Serial digital interface input (compatible with HD/SD)
HDMI : HDMI input
YP
B
P
R
: Analog component input
VF
: Viewfinder input (VF-YP
B
P
R
/ VF-VIDEO)
*
1
INT SG: Internal chart for adjustment [Color Bar + Grayscale] (page 74)
The input line when the power supply is switched ON is the one that was selected the last time the
•
power was switched OFF. The INPUT SELECT menu settings can be used to skip input lines that are
not used.
In 3D assist mode, the input is fixed to SDI1/SDI2 and the input line cannot be selected.
•
When the control lock is on, input lines cannot be selected.
•
It is not possible to switch to INT SG when two screens are displayed with the SUB WINDOW function
•
(→ page 42).
The menu is used to set either YP
*
1
B
P
R
or VIDEO for the viewfinder input.
Summary of Contents for BT-LH910G
Page 75: ...75 Memo ...