Panasonic BT-LH910G, Operating Instructions Manual

Page: 62 / 76

62
When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio
* 1
display, both markers are displayed.
When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker
* 2
selected by the 16:9 marker is controlled.
REMOTE Specifications
This monitor permits remote operation via GPI/SERIAL terminal.
GPI terminal
GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each
terminal (page 47).
Functions assigned to terminals are executed when GND (pin 5) is short-circuited (ON) or open (OFF).
Operating conditions
■
Level operation: Operates when GND is short-
circuited.
Edge operation: Operates when GND changes
from open to short-circuited.
<Notes>
When level operation is assigned to more than •
one terminal, the function operates as long as
one of the terminals is short-circuited.
Hold the edge operation for at least 0.2
•
seconds after the change.
GPI Terminal (9P)
Pin number Signal
1 GPI1
2 GPI2
3 GPI3
4 GPI4
5 GND
6 GPI5
7 GPI6
8 GPI7
9 GPI8
Assigned item Function Operating conditions
UNDEF Undefined (no function assigned) —
MARKER1
ON/OFF *
1
Switches marker display defined in “GPI
MARKER1” (page 27) in the “MARKER”
menu. Level operation
(Short-circuited: ON, Open: OFF)
MARKER2
ON/OFF * 1
Switches marker display defined in “GPI
MARKER2” (page 27) in the “MARKER”
menu. Level operation
(Short-circuited: ON, Open: OFF)
MARKER BACK
HALF
*
2
Reduces the brightness of the background
outside the marker displayed in “GPI
MARKER1” (page 27) to 50 %. Level operation
(Short-circuited: ON, Open: OFF)
MARKER BACK
BLACK
*
2
Reduces the brightness of the background
outside the marker displayed in “GPI
MARKER1” (page 27) to 0 %. Level operation
(Short-circuited: ON, Open: OFF)
CENTER MARKER Turns the center marker display on and
off. (When other markers are displayed,
this marker is superimposed on other
markers.) Level operation
(Short-circuited: ON, Open: OFF)
SD ASPECT Sets the aspect ratio for SD signal input.
(Disabled during HD signal input) Level operation (Short-circuited:
16:9, open: 4:3)
SCAN Switches the scan mode between
“UNDER” and “NORMAL”. Level operation (Short-circuited:
UNDER, Open: NORMAL)
GAMMA SEL. FILM Switches the gamma curve to FILM mode. Level operation (Short-circuited: FILM
mode, Open: STANDARD mode)
(Continued on next page)