Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download

Page: 90 / 160

Operating Instructions

2.18 Stop the SD Memory Recording

After you stop the SD memory recording, remove the SD memory card.

Note

•

You can confirm the SD memory capacity on the Status page (see page
118).

Click [Buffer/Transfer] on the Setup page.

Click [SD video recording stop].

Click [OK] on the confirmation window.

•

The SD memory recording is stopped.

Click [Go to Image Buffer/Transfer page].

•

The Image Buffer/Transfer page is displayed.

Note

•

If the camera is restarted (see page 119), the SD memory recording starts
again.

•

If you remove the SD memory card and insert it again, the SD memory
recording starts again (see page 36 of the Installation/Troubleshooting).

•

Ensure that recording has been stopped, before removing the SD memory
card. If the SD memory card is removed while recording, the image file will
most likely become unreadable. In this case, format the SD memory card
again. (Files will be deleted.)

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands