Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download Page 38

Page: 38 / 160

Operating Instructions

1.5.1

Deleting Buffered Images

If you intend to delete images for each transfer condition, click [Delete Buffered
Images] on the Image Buffer/Transfer page (see page 91 or page 100).

Note

•

If you click [Save] on the Image Buffer/Transfer page, all buffered images on
the SD memory card are deleted.

•

If you are buffering images on the internal memory, the following operations
also delete all buffered images.
•

Turning off the camera.

•

Saving the Date and Time page.

•

Restarting, updating firmware or resetting the camera to factory default.

•

Changing the setting for [Enable Image Buffer/Transfer] (see page 91 or
100).

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands