Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download

Page: 120 / 160

Operating Instructions

120

3.1.4

Updating the Camera Firmware

The Update Firmware page allows you to update the camera firmware. If the new
firmware is available, install it into the camera.

Note

•

Do not turn off the power during firmware update.

•

All buffered images on the internal memory will be deleted after the
firmware update. The buffered images on the SD memory card are not
deleted.

•

The firmware version is displayed on the Top page and the Status page.

Download the new firmware on the Panasonic Network Camera support
website at

http://panasonic.co.jp/pcc/products/en/netwkcam/

, and save it

on your PC.

Click [Update Firmware] on the Maintenance page.

Click [Update Firmware].

•

The camera restarts.

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands