Operating Instructions
42
Basic
(1)
Network (IPv4)
Configures the IPv4 network settings to connect the
camera to the network (see page 44).
(2)
Network (IPv6)
Configures the IPv6 network settings to connect the
camera to the network (see page 49).
(3)
IPsec
Enables IPsec (Transport or Tunnel mode) (see page 53).
(4)
UPnP
Enables automatic port forwarding or shortcut to the
camera (see page 63).
(5)
Viewnetcam.
com
Registers with the Viewnetcam.com service (see page 65).
(6)
Date and Time
Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page 67).
(7)
Camera
Sets camera name, white balance, AC power source
frequency, automatic focus range, mounting type, pan/tilt
range, return to specified position, color night view, and
vertical resolution settings (see page 69).
(8)
Audio
Sets output, volume, PC audio input timeout, input, camera
microphone sensitivity and mute during pan/tilt settings
(see page 75).
Account
(9)
Administrator
*1
*1
If you change [Administrator], [General User], or [Multi-Camera Setup page] settings,
changes will not be applied to the video (Motion JPEG) viewers. Restart the camera to make
changes applied to all video viewers.
Sets authentication setting and administrator security (user
name and password) (see page 77).
(10)
General User
*1
Sets general user security (user name and password) and
general user's access level (see page 81).
Advanced
(11)
Image Display
Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, time stamp setting, and
language (see page 84).
(12)
Multi-Camera
*1
Sets the camera IP address or host name, camera name on
the Multi-Camera page (maximum 12 cameras) (see page
87).
Summary of Contents for BB-HCM381A - Network Camera
Page 156: ...Operating Instructions 156 ...
Page 157: ...Operating Instructions 157 Index ...
