Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download

Page: 91 / 160

Operating Instructions

[For assistance, please call: 1-800-272-7033] 91

2.19 Buffering or Transferring Images by Timer

The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.

Note

If you are recording images to the SD memory card, refresh interval slows
down.

Click [Buffer/Transfer] on the Setup page.

Click [No.] to enable buffer/transfer.

Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click
[Next>].

Note

If you click [Save], all buffered images on the SD memory card are deleted.

•

Click [Delete Buffered Images] to delete this buffered images.

•

Click [Save] to save the settings.

•

Clicking [Cancel] takes you back to the Image Buffer/Transfer page without
saving changes.

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands