Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download Page 99

Page: 99 / 160

Operating Instructions

[For assistance, please call: 1-800-272-7033] 99

Confirm the settings, and click [Save].

•

New settings are saved.

•

When finished, "Success!" is displayed.

Click [Go to Image Buffer/Transfer page].

•

The Image Buffer/Transfer page is displayed.

Note

•

If you click [Save] on the Image Buffer/Transfer page, all buffered images
on the SD memory card are deleted.

•

If you are buffering images on the internal memory, the following
operations also delete all buffered images.
•

Turning off the camera.

•

Saving the Date and Time page.

•

Restarting, updating firmware or resetting the camera to factory
default.

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands