Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download Page 63

Page: 63 / 160

Operating Instructions

[For assistance, please call: 1-800-272-7033] 63

2.7

Using UPnP™ (Universal Plug and Play)

UPnP

can automatically configure your router to be accessed from the Internet.

In order to use this feature, your router needs to support this feature and it must be
enabled. Most router manufacturers disable this feature as the default setting. See

http://panasonic.co.jp/pcc/products/en/netwkcam/technic/rtr_setup/

for

details and see your router manual for how to enable UPnP

. After the UPnP

enabled on the router, set [Enable] for auto port forwarding.

Note

The camera's UPnP

does not support IPv6. Use this feature in IPv4.

Click [UPnP] on the Setup page.

Set up UPnP.

Setting

Description

Auto Port
Forwarding

•

If the network setting is [Static] or [DHCP], enabling auto
port forwarding allows you to access the camera from the
Internet.

Note

If the network setting is [Automatic Setup], enable [Allow
Access from the Internet] on the Network page (see page
46).

Display Shortcut
Icon in My
Network Places

•

Enabling it displays a shortcut to the camera in the My
Network Places folder.

Note

If you use Windows XP or Windows Me, this feature is
available. Enable UPnP

Windows component before

using this feature (see page 149).

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands