Panasonic BB-HCM381A - Network Camera Operating Instructions Manual Download Page 119

Page: 119 / 160

Operating Instructions

[For assistance, please call: 1-800-272-7033] 119

3.1.3

Restarting the Camera

The Restart page can restart the camera. The camera can also be restarted by
pressing the RESTART button or by disconnecting the power cord from the outlet
and reconnecting it again.

Note

When the camera restarts, the buffered images will be deleted. The buffered
images on the SD memory card are not deleted.

Click [Restart] on the Maintenance page.

Click [Restart].

•

Restarting takes about 1 minute. The Top page is displayed when finished.

Summary of Contents for BB-HCM381A - Network Camera

































































































































































Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands

Panasonic BB-HCM381A - Network Camera, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381A - Network Camera

Reviews:

Related manuals for BB-HCM381A - Network Camera

Brands by name

Popular brands