– 25 –
Chapter 2 Description of Parts — Upper side
Upper side
1
2
1
5 6
7
4
8
9
3
1
Viewfinder front/back positioning lever
To adjust the front/back position of the viewfinder, loosen this lever and slide the viewfinder forwards or backwards to adjust the viewfinder to a
position that enables easy viewing. After adjusting the viewfinder, turn the lever towards <LOCK> to lock the position.
2
Viewfinder left-right positioning ring
To adjust the left/right position of the viewfinder, loosen this lever and slide the viewfinder to the left or right to adjust the viewfinder to a position that
enables easy viewing. Tighten the lever to clamp the viewfinder in place after adjusting.
3
Light shoe
Used to mount a video light, etc.
4 Microphone holder holes
Used to mount a microphone.
5
<PTT> switch
Used to switch the intercom microphone on/off. The function can be changed in [MAIN MENU]
→
[SWITCH MODE]
→
[USER SWITCH]
→
[GRIP
PTT].
6
<RET> switch
Used to switch to the return A signal. The function can be changed in [MAIN MENU]
→
[SWITCH MODE]
→
[USER SWITCH]
→
[GRIP RET].
7 Accessory mounting hole
Used to attach accessories. This hole is used only for the purpose of attaching accessories.
f
Mounting hole size
-
1/4-20 UNC (screw length 13 mm or shorter)
8
Lock release button
Used to release the lock of the V-groove.
9 V-groove
Used to attach the rear viewfinder.
