Panasonic AK-HC5000G, Operating Instructions Manual

Page: 53 / 110

– 53 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[OUTPUT LEVEL] Sets the output signal level of the stand-by intercom.
[ − 36dB]…[ + 12dB]
f
Factory setting: [0dB]
[CANCEL LEVEL] Sets the input/output cancel signal level of the stand-by intercom.
[ − 20.0dB]…[ + 20.0dB] (0.5 dB step)
f
Factory setting: [0.0dB]
[STBY INCOM ON/OFF] Enables/disables the stand-by intercom.
[OFF], [ON]
f
Factory setting: [ON]
[CRANE INTERCOM]
Item Description of settings
[CRANE INCOM
SETTING]
[INPUT LEVEL] Sets the input volume of the crane intercom (connected to the <EXT I/O> terminal).
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
[OUTPUT LEVEL] Sets the output volume of the crane intercom (connected to the <EXT I/O> terminal).
[ − 36dB]…[ + 12dB]
f
Factory setting: [0dB]
[SIDE TONE] Sets the side tone volume of the crane intercom (connected to the <EXT I/O> terminal).
[OFF], [ − 36dB]…[0dB] (3 dB step)
f
Factory setting: [ − 6dB]
[ENG/PROD] Sets the line input of the crane intercom audio.
[ENG], [PROD], [BOTH]
f
Factory setting: [ENG]
[CRANE TO CCU] Sets whether to output the crane intercom audio to the CCU.
[OFF], [ON]
f
Factory setting: [OFF]
[CRANE INCOM
OUTPUT SETTING]
[PGM1 MIX] Sets whether to mix the PGM1 signal with the crane intercom output.
[OFF], [ON]
f
Factory setting: [ON]
[PGM2 MIX] Sets whether to mix the PGM2 signal with the crane intercom output.
[OFF], [ON]
f
Factory setting: [ON]
[INCOM1 MIX] Sets whether to mix the intercom 1 signal with the crane intercom output.
[OFF], [ON]
f
Factory setting: [OFF]
[INCOM2 MIX]
([CLEAR COM MIX])
Sets whether to mix the intercom 2 signal (CLEAR COM signal for Clear-Com option) with the crane
intercom output.
[OFF], [ON]
f
Factory setting: [OFF]
[CLEAR COM]
This item is not displayed when intercom 2 is connected.
Item Description of settings
[CLEAR COM SETTING] [INPUT LEVEL] Sets the input volume of Clear-Com.
[ − 36dB]…[ + 12dB]
f
Factory setting: [0dB]
[CANCEL LEVEL] Sets the input/output cancel signal level of Clear-Com.
[ − 20.0dB]…[ + 20.0dB] (0.5 dB step)
f
Factory setting: [0.0dB]
[SIDE TONE] Sets the side tone volume of Clear-Com.
[OFF], [ − 36dB]…[0dB] (3 dB step)
f
Factory setting: [ − 6dB]
[CLEAR COM TO CCU] Sets whether to output the Clear-Com audio to the CCU.
[OFF], [ON]
f
Factory setting: [ON]
[CLEAR COM OUTPUT
SETTING]
[PGM1 MIX] Sets whether to mix the PGM1 signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [ON]
[PGM2 MIX] Sets whether to mix the PGM2 signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [ON]
[INCOM1 MIX] Sets whether to mix the INCOM1 signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [OFF]
[CRANE INCOM MIX] Sets whether to mix the CRANE INCOM signal with Clear-Com output.
[OFF], [ON]
f
Factory setting: [OFF]