– 54 –
Chapter 4 Menu Operations — Menu list
[EAR PHONES SETTING]
Item
Description of settings
[LCH OUTPUT SELECT]
Sets the audio signal output to the L channel of the earphones.
[INCOM1(CH1)], [INCOM2(CH1)] (for Clear-Com option: [CLEAR COM]), [INCOM1/2 MIX(CH1)] (for
Clear-Com option: [INCOM1(CH1)/CLEAR COM MIX]), [PGM1], [PGM2], [PGM1/PGM2 MIX], [MIC1],
[OFF]
f
Factory setting: [INCOM1(CH1)]
[RCH OUTPUT SELECT]
Sets the audio signal output to the R channel of the earphones.
[INCOM1(CH2)], [INCOM2(CH2)] (for Clear-Com option: [CLEAR COM]), [INCOM1/2 MIX(CH2)] (for
Clear-Com option: [INCOM1(CH2)/CLEAR COM MIX]), [PGM1], [PGM2], [PGM1/PGM2 MIX], [MIC2],
[OFF]
f
Factory setting: [INCOM1(CH2)]
[LCH MONITOR LEVEL]
Sets the monitor output level for the L channel of the earphones.
[
−
40dB]…[
+
12dB]
f
Factory setting: [0dB]
[RCH MONITOR LEVEL]
Sets the monitor output level for the R channel of the earphones.
[
−
40dB]…[
+
12dB]
f
Factory setting: [0dB]
[PGM OUTPUT]
These items can be set only when the PGM option is used.
Item
Description of settings
[PGM OUTPUT SELECT]
Sets the audio output from the <PGM OUT> terminal.
[PGM1], [PGM2], [PGM1/PGM2], [ENG], [PROD], [ENG/PROD], [CRANE]
f
Factory setting: [PGM1]
[PGM OUTPUT LEVEL]
Sets the output level from the <PGM OUT> terminal.
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
[LEVEL/PGM1/PGM2 VR SETTING]
Item
Description of settings
[INTERCOM1 PGM1 VR]
Sets the audio signal to be controlled by the <PGM1> dial of <INTERCOM1>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM2] (for Clear-Com
option: [CLEAR COM])
f
Factory setting: [PGM1]
[INTERCOM1 PGM2 VR]
Sets the audio signal to be controlled by the <PGM2> dial of <INTERCOM1>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM2] (for Clear-Com
option: [CLEAR COM])
f
Factory setting: [PGM2]
[INTERCOM2 PGM1 VR]
Sets the audio signal to be controlled by the <PGM1> dial of <INTERCOM2>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM1]
f
Factory setting: [PGM1]
[INTERCOM2 PGM2 VR]
Sets the audio signal to be controlled by the <PGM2> dial of <INTERCOM2>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM1]
f
Factory setting: [PGM2]
[VR MIN MODE]
Sets the level when the volume level is minimum.
[MUTE]:
Muted
[MIN GAIN]:
Minimum level
f
Factory setting: [MUTE]
[B/U INTERCOM LEVEL]
Sets the audio signal to be controlled by the intercom level of the Build-up Unit.
[OFF], [INCOM1], [INCOM2] (for Clear-Com option: [CLEAR COM]), [INCOM1/INCOM2] (for Clear-
Com option: [INCOM1/CLEAR COM])
f
Factory setting: [OFF]
[OPT INTERCOM INPUT SETTING]
Item
Description of settings
[OPT ENG INPUT LEVEL]
Sets the input level of the ENG audio signal sent from the CCU to the camera.
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
[OPT PROD INPUT LEVEL]
Sets the input level of the PROD audio signal sent from the CCU to the camera.
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
[OPT PGM1 INPUT LEVEL]
Sets the input level of the PGM1 audio signal sent from the CCU to the camera.
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
[OPT PGM2 INPUT LEVEL]
Sets the input level of the PGM2 audio signal sent from the CCU to the camera.
[
−
36dB]…[
+
12dB]
f
Factory setting: [0dB]
