– 34 –
Chapter 3 Preparation — Connecting a microphone
When mounting a microphone holder (optional) for use
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Clamping screw
Lock lever
<MIC 1> terminal
1
Remove the screws on the microphone holder mounting position and mount the microphone holder AJ-MH800G (optional). (Fig.
1)
2
Mount the microphone and tighten the clamping screw. (Fig. 2)
3
Loosen the lock lever, adjust the angle of the microphone, and then tighten the lock lever. (Fig. 3)
4
Insert the microphone cable into the cable clamp and connect it to the <MIC 1> terminal (front). (Fig. 4)
5
Set the <FRONT>/<REAR> switch (<MIC 1>) to <FRONT>.
6
Set the <LINE/MIC/
+
48V> selector switch (<MIC 1>) to <MIC> or <
+
48V>.
