Panasonic AK-HC5000G, Operating Instructions Manual

Page: 46 / 110

– 46 –
Chapter 4 Menu Operations — Menu list
[GAIN SETTING]
Item Description of settings
[LOW GAIN] Sets the amount of gain increase when <L> is selected for the <GAIN> switch.
[ − 6dB]…[36dB]
When [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [NORMAL] is set:
[ − 3dB]…[36dB]
f
Factory setting: [0dB]
[OFFSET LOW GAIN] Sets the offset from [LOW GAIN].
[ − 2.9dB]…[ + 2.9dB] (0.1 dB step)
f
Factory setting: [0.0dB]
[MID GAIN] Sets the amount of gain increase when <M> is selected for the <GAIN> switch.
[ − 6dB]…[36dB]
When [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [NORMAL] is set:
[ − 3dB]…[36dB]
f
Factory setting: [9dB]
[OFFSET MID GAIN] Sets the offset from [MID GAIN].
[ − 2.9dB]…[ + 2.9dB] (0.1 dB step)
f
Factory setting: [0.0dB]
[HIGH GAIN] Sets the amount of gain increase when <H> is selected for the <GAIN> switch.
[ − 6dB]…[36dB]
When [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [NORMAL] is set:
[ − 3dB]…[36dB]
f
Factory setting: [18dB]
[OFFSET HIGH GAIN] Sets the offset from [HIGH GAIN].
[ − 2.9dB]…[ + 2.9dB] (0.1 dB step)
f
Factory setting: [0.0dB]
[IRIS]
Item Description of settings
[AUTO IRIS] Enables/disables the auto iris mode.
[OFF], [ON]
f
Factory setting: [ON] (when the camera is used standalone), [OFF] (others)
[WINDOW SELECT] Sets the photometric range.
[1]…[4]
The image of window will be as follows.
[1] [2] [3] [4]
f
Factory setting: [1]
[IRIS LEVEL] Adjusts the target value (brightness) of the auto iris.
[0]…[100]
f
Factory setting: [50]
[PEAK RATIO] Sets the ratio of the peak value and average value of auto iris photometry.
[0]…[100]
f
Factory setting: [50]
[IRIS RANGE] Sets the fine adjustment range of the auto iris level using the iris adjustment joystick.
[NORMAL], [(3/4)], [(2/4)], [(1/4)]
f
Factory setting: [NORMAL]
[IRIS SPEED] Sets the auto iris speed.
[1]…[25]
f
Factory setting: [15]
[IRIS GAIN] Switches whether to adjust auto iris photometry speed adjustment with the iris gain volume of the lens or
from the menu. Normally, set this to [LENS] and make adjustments with the iris volume of the lens.
[LENS], [CAM]
f
Factory setting: [LENS]
[LENS EXT COMP SW] Sets the ALC compensation when the lens extender is enabled.
[OFF], [ON]
f
Factory setting: [OFF]
[EXTENDER1] Sets the magnification of lens extender 1.
[NONE], [0.1]…[9.9]
f
Factory setting: [2.0]
[LENS EXT COMP LEVEL] Sets the iris compensation level when lens extender 1 is enabled.
[ − 100]…[ + 100]
f
Factory setting: [0]
[EXTENDER2] Sets the magnification of lens extender 2.
[NONE], [0.1]…[9.9]
f
Factory setting: [NONE]