Panasonic AK-HC5000G, Operating Instructions Manual

Page: 67 / 110

– 67 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[TRUNK1] Sets the serial interface standard of the <TRUNK> terminal.
[RS422], [RS232C]
f
Factory setting: [RS422]
[TRUNK2] Sets the serial interface standard of the <TRUNK> terminal.
[RS422], [RS232C]
f
Factory setting: [RS422]
[BACK LIGHT] Sets the brightness of the backlight.
[1]…[70]
f
Factory setting: [20]
[LAN] Sets the usage for the <LAN> terminal.
[TRUNK], [PC]
f
Factory setting: [PC]
[B/U LENS] Sets the lens type of the Build-up Unit.
[PORTABLE], [BOX]
f
Factory setting: [BOX]
[T-BAR CONNECT] Sets whether to connect the T-BAR unit.
[OFF], [ON]
f
Factory setting: [OFF]
[LENS I/F] Sets the lens interface.
[ANALOG], [SERIAL]
f
Factory setting: [SERIAL]
[DISPLAY STATUS/BAR
OSD]
[CAM ID CHARACTER] Sets the camera name.
[GEN-LOCK] [H PHASE-COARSE] Roughly adjusts the phase of horizontal synchronization.
[ − 5]…[ + 5]
f
Factory setting: [0]
[H PHASE-FINE] Finely adjusts the phase of horizontal synchronization.
[ − 100]…[ + 100]
f
Factory setting: [0]
[AUTO SET UP]
This cannot be set in HDR mode.
Item Description of settings
[FILTER] Sets the ND/CC filter mode for automatic setup.
[REF], [CURRENT]
f
Factory setting: [REF]
[SETUP MODE] Sets the mode for automatic setup.
[FULL], [EASY]
f
Factory setting: [FULL]
[REFERENCE FILE] Sets the reference file for automatic setup.
[FACTORY], [USER1], [USER2], [USER3], [REF1], [REF2], [REF3]
f
Factory setting: [FACTORY]
[MASTER PEDESTAL TARGET] Sets the master pedestal for automatic setup.
[0.0%]…[7.5%]
f
Factory setting: [3.0%]
[AUTO SET UP EXECUTE] Selects whether to execute with the configured settings.
[NO], [YES]
[NETWORK SETUP]
[NETWORK SETUP] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item Description of settings
[IP ADDRESS] Sets the IP address.
f
Factory setting: [192.168.0.30]
[SUBNET MASK] Sets the subnet mask.
f
Factory setting: [255.255.255.0]
[DEFAULT GATEWAY] Sets the default gateway.
f
Factory setting: [192.168.0.1]
[HTTP PORT] Sets the port number of HTTP (port number when accessing with a browser).
[1]…[65535]
f
Factory setting: [80]
[ROP PORT] Sets the port number when connecting to ROP.
[49152], [49200]…[49299]
f
Factory setting: [49152]
[SET EXCUTE] Selects whether to execute with the configured settings.
[NO], [YES]
[MAC ADDRESS] Displays the MAC address. (This cannot be changed.)