Panametrics Sentinel LCT, User Manual

Page: 97 / 248

Sentinel LNG User’s Manual 85
Chapter 5. Using PanaView
5.6.5 Signal Setup
1. To set up or make changes to the signal values, click on
Signal
and the following screen appears.
.
Figure 71: Editing Signal Values
2. Click on categories to be set, select a type from each list, and make changes to the text boxes as needed.
5.6.6 K Factor Setup
To set up the K Factor, from the
Program
screen, click on
K Factor
and proceed as in
Fluid
beginning on page 78.