Panametrics Sentinel LCT, User Manual

Page: 50 / 248

Chapter 3. General Programming
38 Sentinel LNG User’s Manual
3.2.1 Indicator Lights
If the Fault Indicator is lit, an instrument fault is detected. An error indication will be displayed in the lower right-hand
corner of the Measurement View.
If the
User Intervene Indicator is lit, an alarm has been triggered and will be kept latched until cleared by the user.
See Wiring the Alarm Relay on page 25 and Inputs/Outputs on page 51 for more information.
The Keypad Lock Indicator will be lit if the Keypad Lock-Out Switch, internal to the instrument, has been engaged.
Note: If the Keypad Lock Indicator is lit, the keypad will not be functional.
The Total Lock Indicator will be lit if the Totals Lock-Out Switch, internal to the instrument, has been engaged.
Note: If the Total Lock Indicator is lit, totals are not able to be reset by the Clear Totals Key or through
programming.
The Power Indicator is normally lit when the instrument is powered.
3.2.2 The Magnetic Stylus
Each of the keys can be selected using a hand-held magnet called a Magnetic Stylus , which is included with the
meter. By touching the clear window at a key location, that key will be selected and will flash a red light to verify the
contact.
Figure 31: Magnetic Stylus