Panametrics Sentinel LCT, User Manual

Page: 62 / 248

Chapter 3. General Programming
50 Sentinel LNG User’s Manual
3.8 Configuration
1. From the main menu, use the right arrow key to scroll to CONFIG. The screen displays five options: Units,
Communication, Reset Totals, Totalizer Errors and Date/Time. Use the arrow keys to select an option to be
configured.
2. To choose a measurement type, select Units, and press [ENT]. The screen displays Metric and English. Select one,
press [ENT] and the screen returns to the CONFIG menu.
3. To choose a communication type, select Communication and press [ENT]. The screen displays three options:
Panalink, Modbus (if option is included) and HART.
4. Select the desired communication software, press [ENT], and set up the components by making the appropriate
selections from each list of options.
5. To reset the totals, from the CONFIG menu, select Reset Totals and press [ENT].
Note: If the totalizer lock is enabled, the previous totals will not be cleared.
a.
Select a Channel, the Composite setup, or All, and press [ENT].
b. From the next menu, select whether to reset the forward total, the reverse total, or both, and press [ENT].
c. Press [ESC] to return to the CONFIG menu.
6. To set up error handling, from the CONFIG menu, select Totalizer Errors, and press [ENT].
a.
Select a Channel or the Composite setup and press [ENT].
b. Answer the question, Totalize on Error?, by selecting Yes or No. Then press [ENT].
c. Repeat the process for other channels, if necessary, and press [ESC] to return to the CONFIG menu.
7. To reset the date and/or time, from the CONFIG menu, select Date/Time, and press [ENT].
a.
Press [ENT] again to edit the text.
b. Use the arrow keys to select and change numbers in the date/time format.
c. Press [ENT] to accept the change.