Panametrics Sentinel LCT, User Manual

Page: 73 / 248

Sentinel LNG User’s Manual 61
Chapter 4. Advanced Programming
• Select
Off
, and no further choices are available.
• Select
Single
, and the
Sentinel LNG
displays the
K Factor
. To change the value, press [ENT]. Use the arrow keys to
change the value and press [ENT].
IMPORTANT: If the Reynolds Correction factor in the Fluid option has been enabled, the K factor should be set to 1.00.
Otherwise, the typical factor is between 0.5 and 2.00.
• Select
Table
, and the screen displays four options:
Units, Rows Used, Edit Table
and
Reset Table
.
a.
Select
Units
and press
[ENT]
and the screen displays the selected measurement units (either metric or English).
Press [ESC] or [ENT] to return to the previous screen.
b. Select
Rows Used
and the program requests the number of rows desired. Enter the number (from
2
to
20
) and
press [ENT].
c. Select
Edit Table
and the table opens with a series of rows. Scroll to the desired row, and press [ENT].
d. For each row, the screen displays the
X
(velocity) value and the
K Factor
. To change either value, scroll to the
value and press [ENT]. Use the arrow keys to change the value and press [ENT].
e. Repeat steps
c
and
d
until all available data (from
2
to
20
rows) has been programmed.
• Press [ESC] to return to the PROG menu, or continue pressing [ESC] until the display screen reappears.
a.
Select Units and press
[ENT]
and the screen displays two more options: Velocity and Diagnostic . Select Velocity and
press
[ENT]
and the screen displays
Meters/sec
. Press
[ESC]
or
[ENT]
to return to the previous screen. Select
Diagnostic
, press
[ENT]
and
Reynolds #
appears. Press
[ESC]
or
[ENT]
to return to the previous screen.
b. From the
Unit Menu
, select
Rows Used
and press
[ENT].
Use the arrow keys to enter the desired number (from 2 to
20) and press [ENT].
c. Select Edit Table and press [ENT], and the table opens with a series of rows . Scroll to the desired row, and press
[ENT].