Panametrics Sentinel LCT, User Manual

Page: 57 / 248

Sentinel LNG User’s Manual 45
Chapter 3. General Programming
1. Press [ESC] . The Sentinel LNG enters the User Program.
2. Press the [u] key until PROG is bracketed and press [ENT].
3. Use the [p] and [q] keys to scroll to the desired Channel and press [ENT].
4. Scroll to the Signal option and press [ENT].
5. The prompt requests the Zero Cutoff. Near “zero” flow, the Sentinel LNG may have fluctuating readings due to
small offsets (caused by factors such as thermal drift in the fluid). The zero cutoff causes velocity measurements
less than the cutoff to be reported as zero. To set the cutoff, press [ENT] , and use the arrow keys to enter the new
value. Press [ENT] to confirm the entry.
Entering parameters in the Signal option has been completed. Press [ESC] to return to the PROG menu, or continue
pressing [ESC] until the display screen reappears.