Palm P80505RGRS - Tungsten W Smartphone Handbook Download

Page: 160 / 428

Chapter 15

Using SMS

146

Sending and receiving messages

You can send all the messages in your Outbox and retrieve all the new messages
at the same time.

To send and receive messages at the same time:

■

Do one of the following:

– From any SMS list view, tap Send & Check.

– If you have assigned one of the application buttons to open SMS, press and

hold the SMS application button for two seconds. See

“Buttons preferences”

Chapter 21

for more information on assigning application buttons.

After the transmission finishes, a message appears, indicating the number of new
messages you received.

To send all messages in your Outbox:

■

Do one of the following:

– From message view, press Command Stroke

+ E.

– From list view, press Command Stroke

+ S.

– From any view, press Function

+ Menu

, and then select Send on the

Message menu.

To download all messages:

■

From the list view, do one of the following:

– Press Command Stroke

+ H.

– From any view, press Function

+ Menu

, and then select Check on

the Message menu.

Tap Send & Check

Summary of Contents for P80505RGRS - Tungsten W Smartphone













































































































































































































































































































































































































































Search results

Summary of Contents for P80505RGRS - Tungsten W Smartphone

Reviews:

Related manuals for P80505RGRS - Tungsten W Smartphone

Brands by name

Popular brands

Palm P80505RGRS - Tungsten W Smartphone, Handbook

Search results

Summary of Contents for P80505RGRS - Tungsten W Smartphone

Reviews:

Related manuals for P80505RGRS - Tungsten W Smartphone

Brands by name

Popular brands