P.L.A. Plasy, Operating And Maintenance Manual

Page: 74 / 188

Operating and maintenance manual – ENGLISH
26
BED
Over-cab bed
The hanging bed is used as solution on vehicles with mansard.
To compose the bed it will be sufficient to bring the vertical part of the structure (pic.22) in the
same position as the remaining bed structure, so to obtain a uniform surface(pic.23) and to put away
afterwards the pillow in equipment in order to create a mattress.
To put away the bed in driving position (pic.22) it will be enough to put away the pillows and lift the
movable part till the maximum extension of the lifter pistons.
Pict. 22 Employment position Pict. 23 Driving position
Bed with variable volume
In vehicles with garage it is often inserted the possibility to use an additional bed. The structure of the
bed is generally movable, so to be employed according to necessity. When this structure is not used,
it is generally put away in vertical position towards the floor, sustained by apposite supports (pict.26).
This utilisation is defined variable volume because the load volume of the garage changes according
to the bed application (pict. 24 and 25).
Pict. 24- bed position Pict. 25 – garage position Pict. 26 –particular hook