oventrop Regtronic RH HT, Installation And Operating Instructions For The Specialised Installer, Page: 35 / 56

Installation
35
Commissioning
Settings
Tr
oubleshooting
Data comm
unication
en
7 Arrangement
In this menu, all adjustments for the non-heating part of the arrangement can be
made.
A range of optional functions can be selected and adjusted.
7.1 Optional functions
In this menu, additional functions can be selected and adjusted for the arrange-
ment.
By selecting Add new function, different pre-programmed functions can be se-
lected. The optional functions are available as long as free relays are available.
When a function is selected, a sub-menu opens in which all adjustments required
can be made.
With this sub-menu, a relay and, if necessary, certain system components can be
allocated to the function.
The menu item Relay selec. is available in all optional functions. Therefore, it will
not be explained in the individual function descriptions.
With this menu item, a relay can be allocated to the function. All free relays are
available for selection.
In the sub-menu Controller, all free relays of the controller are displayed. If
external modules are connected and registered, their relays will be displayed in
corresponding sub-menus.
When a function has been selected and adjusted, it will appear in the Opt. func-
tions menu above the menu item Add new function.
This allows an easy overview of functions already activated.
An overview about which sensor has been allocated to which component and which
relay has been allocated to which function is given in the Status / Meas. / Balance
values menu.
At the end of each optional function sub-menu, the menu items Function and
Delete function are available.