oventrop Regtronic RH HT, Installation And Operating Instructions For The Specialised Installer, Page: 17 / 56

Installation
17
Commissioning
Settings
Tr
oubleshooting
Data comm
unication
en
5.2 Status menu
The status menu contains information about the current states of all activated
heating circuits, optional functions and HQM. Furthermore, measured and balance
values as well as messages are indicated.
Use the buttons
❷
and
❹
for scrolling through the status menu.
❷
❹
5.3 Heating
In the Status / Heating menu, the status of the heating circuits activated as well
as of the selected optional functions is indicated.
The status of the first heating circuit is also the home screen of the controller. In
this menu, the operating mode of the heating circuit can be changed:
Automatic: Automatic heating mode with optionally activated DHW heating and
circulation.
Day: Constant heating mode with the adjusted day correction.
Night: Constant heating mode with the adjusted night correction and the select-
ed correction mode.
Summer: The heating circuit is switched off. The optionally activated DHW heat-
ing and circulation remain active.
Off: The heating circuit as well as the optionally activated DHW heating and
circulation are switched off.
Holiday: Constant heating mode within an adjustable time frame with the adjust-
ed night correction and the selected correction mode.
If the operating mode Holiday is selected, the adjustment channel Holiday will
appear for adjusting the days of an absence. The day, on which the adjustment is
made, is the first day of absence. The days will be counted backwards at 00:00. The
remaining days are indicated in the status menu (countdown). If 0 is reached, the
controller automatically switches to the operating mode Automatic.
The operating mode of the first heating circuit also applies to all further heating
circuits (via extension modules), if they are linked. If you wish to operate one of
the heating circuits 2 … 7 independently, deactivate the linking of the correspond-
ing heating circuit (see page 27).
5.4 Arrangement
In the Status / Arrangement menu, the status information (Active, Inactive, De-
activated), the temperatures of the relevant sensors and the relays states are
indicated.
5.5 HQM
In the Status / HQM menu, all current measured values of the flow and return
sensors, flow rate and power as well as heat quantity are indicated.