90
6.20.6 Retrofitting attendant controls
fig. 101 Attendant control
a) Assembly on the standard or contour seat
Attendant controls are delivered as an installation kit. On the power wheelchair with the stand-
ard or contour seat, they are attached to the cross tube on the back rest. Two bore holes are
provided for this purpose on the left and right of the back tube, respectively.
Tools:
❒
Allen wrench, size 4
Steps:
1. Hold the bracket for the attendant controls against the back tube.
2. Attach with two Allen head screws.
3. Attach the control panel.
fig. 102 Attaching attendant controls to the standard / contour seat
b) Assembly on the Recaro® seat
On the power wheelchair with the Recaro® seat, the attendant controls are attached to the
headrest.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......
