92
6.21 Push button module
CAUTION
Risk of accidents due to uncontrolled driving characteristics.
The push button module is an option
for the use of the enAble50 system. Improper adaptation of the push button module to a power wheel-
chair with components outside the Otto Bock modular system or subsequent modifications by the user
are not permitted.
The push button module can only be used in combination with a seat module.
The service technician on site establishes which functions are controlled by the push button
module.
The corresponding configuration of the parameter file in the enAble50 control unit is not possi-
ble independently. Therefore, the service technician has to download the parameter file to the
PC using a PC programming station (PCPS: see enAble50 instructions for use (647G490=D/
GB) and send it to Otto Bock via e-mail with a specification for the desired configuration. Here
the configuration file is amended / modified accordingly.
The file sent back by Otto Bock is then uploaded to the control unit by the service technician.
The push button module is delivered as an installation kit.
6.21.1 Preparing the push button module (attaching the icons)
The service technician has to attach the corresponding icons to the push button module accord-
ing to the selected configuration.
Preparation:
❒
Turn the control unit off.
❒
Remove the fuse (see Section 6.2).
Steps:
1. Select the icon from the configuration card, remove it from the backing and attach it in the
recess on the front of the push button module.
INfORMATION
Ensure that the icons are aligned with the recesses in the push button module.
2. Store unused icons with the remaining wheelchair documentation.
3. Insert the fuse.
4. Switch on the control unit.
5. Test the functionality of the push button module.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......
