73
b) Adapting to thigh length
This setting is changed on the footrest holder mounted to the seat frame.
Steps:
1. Pull the footrest lock lever back and pull the footrest up and out.
2. Loosen the two Allen head screws on the back of the adapter.
3. Loosen the two Allen head screws on the left and right of the seat frame, respectively.
4. Disconnect the footrest tube from the adapter or adjust it to a different length.
Properly reassemble all components upon completion of the work.
fig. 81 Adapting the footrest to the thigh length
d) Elevating footrests with calf and knee pads
Tools:
❒
Allen wrench, size 3
❒
Open-end or combination wrench, size 10
Steps:
1. Remove the standard footrest holder.
2. Install the footrest holder for elevating footrests.
3. Loosen the Allen head screws.
4. Remove and replace the standard footrests.
Properly reassemble all components upon completion of the work.
d) Replacing the knee pad
Steps:
1. Remove the footrest.
2. Loosen the Allen head screw.
3. Remove the knee pad or replace if required.
Properly reassemble all components upon completion of the work.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......