57
CAUTION
Risk of burns in the proximity of fire.
The back rest and seat bottom of the power wheelchair are
flame retardant but nevertheless flammable. Therefore utmost caution is required near any sources of
open flame or sparks, especially lit cigarettes.
NOTICE
Risk of damage to seat upholstery.
During any work on the seat, the upholstery must be adequately
protected against mechanical and chemical damage.
6.15.1 Standard seat: Removing the seat cushion and back pad
With the standard seat, the seat cushion and back pad are attached to the seat plate and back
rest upholstery with hook-and-loop connectors and can be removed by simply pulling them off.
6.15.2 Standard seat: Replacing / adjusting the back upholstery
1. Remove the back pad.
2. Remove the entire back upholstery.
3. Individually readjust the hook-and-loop straps according to the needs of the user or remove
them and replace if required.
Properly reassemble all components upon completion of the work.
fig. 57 Back upholstery, standard seat
6.15.3 Replacing the bearing plate (standard and contour seat)
Tools:
❒
Allen wrench, size 5
❒
Open-end or combination wrench, size 13
Steps:
1. Loosen three Allen head screws.
2. Remove the bearing plate and replace if required.
Summary of Contents for C1000 DS
Page 1: ...C1000 DS Service Instructions ...
Page 2: ......